Infinite Automation Co., Ltd. is a trusted company that supplies
the best reconditioned pre-owned SMT machines and factory
automation solution products. Our company is focusing on the supply
of pre-owned Solder Paste Printers, SMT Chip Mounters, Automatic
Optical Inspection, and other PCB assembly line solution products.
Among our offered pre-owned and reconditioned Solder Paste Printing
Machine is the MPM Momentum II BTB Stencil Printer. The MPM®
Momentum® II BTB™ (Back to Back) configurable stencil printer
allows dual-lane processing for higher throughput but without
increasing either line length or capital investment. The Momentum
II BTB stencil printer is the most flexible printer in the Momentum
II machine. The Momentum II BTB printer is a space-saving 200 mm
shorter than the standard Momentum II printer. Configure for
dual-lane processing by positioning two BTB printers back-to-back
in a manufacturing line. Dual-lane processing generates the output
of two printers in the length of one.
MPM Momentum II BTB Stencil Printer
Ultimate Flexibility in the Momentum Platform
Use the MPM printer in-line as a stand-alone or configure
back-to-back for dual-lane output. Print multiple products in a
single SMT line, for example, print top and bottom sides, print the
same side or print mother/daughter boards. The Momentum II BTB
printer comes in two different throughput configurations for
optimum flexibility in line balancing.
Match Printer Strategy to Dual Lane Strategy
The Momentum II BTB printer allows total front-side accessibility
and service, with open access to the electrical system, solvent
reservoir, and other key components. Because the BTB printer
requires no read access or extra buffer space, position each
printer to maximize your facility floor space.
Proven Momentum Series Accuracy and Performance
Alignment repeatability of ±11 microns @ 6 sigmas, Cpk ≥2 and wet
Print accuracy of 17µm@6σ, Cpk ≥ 2, with 6σ capability designed in
and independently verified. The MPM Momentum II series printers are
fast, precise, and highly reliable, with performance unmatched by
any other printer in their class.
Benchmark™ User Interface
Easy to learn and use for the average operator, MPM’s Benchmark
software is powerful yet intuitive, and facilitates rapid setup,
assists with operational tasks, and makes changeover quick and
easy. The software has been upgraded to Windows 10 and new
production tools and new Quickstart programming to make it even
easier to use.
FEATURES:
- AccuCheck Print Capability Verification
- Automatic Paste Dispensing System
- Benchmark User Interface
- BridgeVision System
- EdgeLoc Board Clamping System
- EnclosedFlow Print Head
- OpenApps Architecture
- MPM Vision System & Inspection
- Paste Height Monitor
- Paste Temperature Monitor
- PrinTrack
- RapidClean Stencil Cleaner
- SPI Print Optimizer
- StencilVision System
SPECIFICATIONS:
| BOARD HANDLING |
| Maximum Board Size (X x Y) 609.6 mm x 508 mm (24” x 20”) |
| A dedicated workholder is required for boards with an X size
greater than 20” |
| Minimum Board Size (X x Y) 50.8 mm x 50.8 mm (2” x 2”) |
| Board Thickness 0.2 mm to 5.0 mm (0.008” to 0.20”) |
| Maximum Board Weight 4.5 kg (10 lbs) |
| Board Edge Clearance 3.0 mm (0.118") |
| Underside Clearance 12.7 mm (0.5") standard. Configurable for |
| 25.4 mm (1.0”) |
| Board Hold-Down Fixed top clamps, centernest vacuum |
| Board Support Methods Magnetic pins |
| Optional: Vacuum side dams, vacuum pins, |
| support blocks, dedicated fixtures, patented |
| auto tooling, Quik-Tool |
| PRINT PARAMETERS |
| Maximum Print Area (X x Y) 609.6 mm x 508 mm (24” x 20") |
| Print Gap (Snap-off) 0 mm to 6.35 mm (0" to 0.25") |
| Print Speed 0.635 mm/s - 304.8 mm/s |
| (0.025 in/s - 12 in/s) |
| Print Force 0 to 22.7 kg (0 lb to 50 lbs) |
| Stencil Frame Size 737 mm x 737 mm (29" x 29") |
| Adapters available for smaller sizes |
| VISION |
| Vision Field-of-View (FOV) 10.6 mm x 8.0 mm (0.417” x 0.315”) |
| Fiducial Types Standard shape fiducials (see SMEMA |
| standards), pad/aperture |
| Camera System Single digital camera |
| - MPM patented look up/down vision |
| PERFORMANCE |
| Total System Alignment ±12.5 microns (±0.0005”) at 6 sigma, |
| Accuracy and Repeatability Cpk ≥2.0* |
| Qualification is performed using production environment process
variables; print |
| speed, table lift and camera movement are included in the
capability figure. |
| Wet Print Deposit ±20 microns (±0.0008”) at 6 sigma, |
| Accuracy and Repeatability Cpk ≥2.0* |
| Based upon actual wet printing with positional accuracy and
repeatability verified by |
| a 3rd party measurement system. |
| Cycle Time |
| Momentum II BTB 9 seconds standard |
| Momentum II BTB HiE 7.5 seconds standard |
| FACILITIES |
| Power Requirements 200 to 240 VAC (±10%) single phase @ |
| 50/60Hz, 15A |
| Air Supply Requirements 100 psi at 4 cfm (standard run mode) to 18 |
| cfm (vacuum wipe) (7 bar @ 5 L/s to 12 L/s), |
| 12.7 mm (0.5”) OD x 9.5 mm (3/8”) ID line |
| Height (excluding light tower) 1494.10 mm (58.82") at 940 mm
(37.0”) |
| transport height |
| Machine Depth 1423.5 mm (56.04") |
| Machine Width 1196.0 mm (47.09”) |
| Minimum Front Clearance 508 mm (20.0”) |
| Minimum Rear Clearance 508 mm (20.0”) |
| BTB Configuration 10 mm (0.39”) |
| Machine Weight 797 kg (1757 lbs) |
| Crated Weight 1090.5 kg (2404 lbs) |
